CZPTmer soften pump for plastic sheet extrusion line
CZPT pumps arrive in a assortment of kinds and dimensions to in shape the demands of your extrusion, compounding or polymer generation approach.
Benifits of the metering pump melt equipment pump
1. Stabilizing the output pressure—the pressure on extruder can be reduced by 30%-fifty% after using melt pumps.
two. improving the product quality
three. increasing the extrusion output—reducing pressure on screw and chaning the building pressure from “screw to die” to “melt pump to die”, so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product’s quality and quantity.
four. prolonging the working life—the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable
CZPT pump picture
Technica knowledge
1.Rotate speed: ≤60rpm(Adjustable)
2.Temperature: 400°C (max.)
3.Max.Outlet pressure: 350Bar
4.Max.CZPTential pressure: 275Bar
5.Heating method: CZPT Steel Cartridge Heater
6.CZPTening parts: 12.9 high-strength screws
7.Voltage: 380V(Others are optional)
eight.Frequency: 50Hz(Others are optional)
Variety | Quantity (cc/r) |
Max rotary Velocity (r/min) |
Outlet force (MPa) |
Inlet force (MPa) |
Stream rate L/h | Temperature | ||
Low viscosity 1-1000Pa·s |
Substantial viscosity 1000~8000Pa·s | CZPT-high Viscosity ≥8000Pa·s |
||||||
GM-ME-five | five. | 100 | ≤35 | ~30 | ≤20 | ≤12 | ≤8 | ≤350ºC |
GM-ME-seven.five | 7.five | one hundred | ≤35 | ~30 | ≤20 | ≤18 | ≤10 | |
GM-ME-ten | 10 | one hundred | ≤35 | ~30 | ≤20 | ≤25 | ≤15 | |
GM-ME-20 | 20 | 90 | ≤35 | ~thirty | ≤80 | ≤40 | ≤24 | |
GM-ME-31.five | 31.five | 90 | ≤35 | ~thirty | ≤150 | ≤80 | ≤42 | |
GM-ME-fifty | fifty | eighty | ≤35 | ~30 | ≤220 | ≤120 | ≤70 | |
GM-ME-75 | seventy five | eighty | ≤35 | ~30 | ≤280 | ≤180 | ≤90 | |
GM-ME-one hundred | 100 | eighty | ≤35 | ~30 | ≤350 | ≤230 | ≤120 | |
GM-ME-160 | 160 | eighty | ≤35 | ~thirty | ≤550 | ≤350 | ≤175 | |
GM-ME-two hundred | 200 | 80 | ≤35 | ~thirty | ≤700 | ≤450 | ≤250 | |
GM-ME-250 | 250 | 80 | ≤35 | ~30 | ≤800 | ≤600 | ≤300 | |
GM-ME-355 | 355 | 80 | ≤35 | ~thirty | ≤1000 | ≤750 | ≤350 | |
GM-ME-500 | five hundred | sixty | ≤35 | ~thirty | ≤1500 | ≤1000 | ≤500 | |
GM-ME-750 | 750 | sixty | ≤35 | ~thirty | ≤1850 | ≤1500 | ≤750 | |
GM-ME-one thousand | one thousand | sixty | ≤35 | ~thirty | ≤3000 | ≤2000 | ≤1000 | |
GM-ME-1600 | 1600 | fifty | ≤35 | ~thirty | ≤4000 | ≤3000 | ≤1500 | |
GM-ME-2500 | 2500 | 50 | ≤35 | ~thirty | ≤6000 | ≤4500 | ≤2200 | |
GM-ME-3150 | 3150 | fifty | ≤35 | ~thirty | ≤7000 | ≤5200 | ≤2600 | |
GM-ME-4000 | 4000 | forty | ≤35 | ~thirty | ≤8000 | ≤6000 | ≤3000 | |
Remark:the melt equipment pump circulation is related with the operate velocity, substance viscosity, stress, So the design selection you should inquire for us. |
Software fields
CZPTmer CZPT(movie, pipe, plate, sheet, granulation )
Higher Temperature or Large Viscosity CZPT (Pc, PMMA, Ab muscles, HIPS, PET, PVB, PS, PP, PA, PE, PVA)
CZPT Fiber CZPT (polyester for cotton-fiber, polypropylene )
Other CZPTmer CZPT CZPT (rubber, asphalt, paint, adhesives, coatings, lubricants)
CZPTmer melt pump for plastic sheet extrusion line