Introduction: 
1. HS series slurry pump is developed for the continuous pumping of high abrasive, large density slurries with nominal servicing requirements. The putting on elements are created of ultra chrome or and rubber. It will preserve large performance over the wear lifestyle of its factors. 

2. The steel soaked elements and rubber kinds can be interchangeable for dealing with different liquids or slurries.

3. HS slurry pumps are accessible in measurements ranging from 1 inch to 18 inch discharge and characteristic large effectiveness functionality capable of flow costs from 10.eight to 5400 m³/h and heads up to one hundred twenty five meters for substantial head versions. 

Features:
1. Cylindrical framework of bearing assembly: handy to alter the room among impeller and entrance liner
and can beremoved completely
two. Interchangeable anti-abrasive wet parts produced of higher-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs provide substantial working pressure capabilities
and an further measure of basic safety.
four. The discharge department can be oriented to any eight positions at the interval of forty five degrees
five. Various generate sorts: DC(direct connection), V-belt travel, gear box reducer, hydraulic couplings, VFD,
SCR management, and so forth
6. The shaft seal uses the packing seal, expeller seal and mechanical seal

Standard Application:

For the materials of sporting components,
“M” = metallic, ultra chromium alloy         “R” = anti-abrasive rubber

Get in touch with

Welcome to speak to us any time for particulars.
Your inquiry will get our prompt consideration and reaction !