Introduction:
one. HS series slurry pump is developed for the constant pumping of higher abrasive, substantial density slurries with minimal upkeep requirements. The putting on components are manufactured of extremely chrome or and rubber. It will preserve high performance more than the use daily life of its components.
2. The steel wet areas and rubber types can be interchangeable for dealing with distinct liquids or slurries.
3. HS slurry pumps are available in sizes ranging from 1 inch to 18 inch discharge and function high efficiency overall performance capable of flow rates from ten.8 to 5400 m³/h and heads up to a hundred twenty five meters for substantial head versions.
Attributes:
one. Cylindrical framework of bearing assembly: handy to adjust the space among impeller and entrance liner
and can beremoved totally
two. Interchangeable anti-abrasive soaked areas produced of high-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs supply high running stress abilities
and an added measure of basic safety.
four. The discharge department can be oriented to any 8 positions at the interval of forty five degrees
five. Numerous travel varieties: DC(immediate link), V-belt generate, gear box reducer, hydraulic couplings, VFD,
SCR management, and so forth
6. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Application:
| • CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
| • Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina CZPT | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electrical power (Kw) |
Inlet & Outlet dimensions (inch) | Substance for Put on Areas | Stream Charge (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.5/one | M | 12.six~28.8 | 3.five~8 | six~sixty eight | 1200~3800 | 152 |
| R | 10.8~twenty five.two | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/one.5 | M | 32.4~seventy two | nine~twenty | six~58 | 1200~3200 | 184 |
| R | twenty five.2~54 | seven~15 | 5.five~41 | a thousand~2600 | 178 | |||
| 50HS-C | 30 | three/two | M | 39.6~86.4 | eleven~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.six | 10~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/three | M | 86.4~198 | 24~55 | nine~fifty two | one thousand~2200 | 245 |
| R | 79.2~180 | 22~50 | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | six/four | M | 162~360 | 40~a hundred | twelve~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | forty~90 | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | 8/6 | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~two hundred | 7~49 | 400~one thousand | 510 | |||
| 200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | one hundred seventy~380 | eleven~sixty one | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
| R | 1152~2520 | 320~seven hundred | 13~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | 700~1500 | thirteen~57 | 200~400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | sixteen.2~34.2 | four.five~9.five | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | three/two | M | sixty eight.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | 4/3 | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/4 | M | 324~720 | 90~two hundred | 30~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | a hundred thirty~280 | 20~ninety four | five hundred~1000 | 711 |
For the content of putting on elements,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Welcome to get in touch with us any time for information.
Your inquiry will get our prompt interest and reaction !