UC481 automobile loading and unloading CNC router,the goal of the autoloader is to get more efficiency out of the CNC with out necessitating far more people.One particular man or woman can nonetheless function the equipment,since all the materials handled routinely and it really can make it a much less complicated task for the operator.
Item description
| Product | UC481 load and unload |
| X-Y-Z axis functioning region | 1,220 x 2,440 x 200mm |
| CZPT measurement | 2,two hundred x 3,600x2200mm |
| Repositioning resolution | .02mm |
| X-Y motion | rack and pinion, gear push |
| Z motion | ball screw push/ZheJiang |
| Xihu (West Lake) Dis. | Linear 25 square/ZheJiang |
| Max. velocity | sixty,000mm/min |
| Max. chopping pace | forty,000/min |
| Spindle energy | 9.6KW HSD air cooling -Italy ISO 30 |
| Auto device changer | servo motor carousel variety |
| Spindle speed | 24,000rpm |
| CZPT electrical power | 11kw Delta |
| CZPT motors | YASKAWA servo motor 850W |
| Working voltage | AC380V/50-60Hz, three-period |
| Command code | G code |
| Laptop interface | USB 2. |
| Desk | vacuum table with 5.5kw pump |
| software free of charge | Alphacam,Alphacam copy |
| controller | Syntec 21A |
3 actions to know how it operates
Stage one:as the sheet is loaded ,the stack automatically raises to the following sheet.
Stage two:the device Traverse at the conclude of center table ,then three suction cups are in excess of the end of the panel, they decide it up with vacuum.at in the meantime ,pusher come out from fence and thrust the sheet to unloading table,it starts off feeding all these areas down here ,till they split a mild beam on this end. poisition unit align the sheet.so that lines it perfectly on the table.
Step three:operator could put labels on and operator also consider the elements off of the device and it truly is true simple ,operator puts it on a stack or a rack or wherever.
Thorough photos
Accessories you will get
Comoany data
Client check out
Samples demonstrate