Downhole Motor for Directional Drilling
>>Product Description
CZPT Parameter
Spec. | Suggested Gap Dimensions | Enter Movement Rate | Stress Reduction | Bit Speed | Functioning Torque | Delay CZPT Torque | Output Energy | Drilling Excess weight | Max Drilling Excess weight | Joint Thread | Length | ||
Device | mm | In | L/S | Mpa | r/min | N.m | N.m | KW | KN | KN | In | In | mm |
5LZ57×7. | eighty three-121 | 31/4-43/four | one.five-three.5 | three.two | 185-430 | two hundred | 350 | 4.3-10.one | five | ten | 11/2REG | 11/2REG | 2822 |
5LZ73×7. | 83-121 | 31/four-43/four | two-four | three.two | 80-a hundred and sixty | 615 | 1077 | 5.eight-eleven.five | 12 | 25 | 23/8REG | 23/8REG | 3423 |
9LZ89×7. | one zero five-143 | forty one/8-55/8 | 3-eight | 3.2 | 147-392 | 504 | 882 | eight.64-23 | 20 | 30 | 27/8REG | 27/8REG | 2911 |
5LZ95×7. | 114-a hundred and fifty | forty one/eight-fifty seven/8 | five-twelve | 3.two | a hundred and forty-320 | 710 | 1240 | ten.five-25 | 21 | 40 | 27/8REG | 27/8REG | 3920 |
5LZ120×7. | 152-200 | six-seventy seven/8 | 8-sixteen | three.2 | eighty-one hundred eighty | 1850 | 3200 | 23-47 | sixty four | 106 | 31/2REG | 31/2REG | 5039 |
5LZ165×7.0V | 245-244 | eighty one/8-ninety five/eight | eighteen-thirty | 3.two | 111-167 | 4440 | 7770 | 57.six-86.four | eighty | one hundred sixty | 41/2REG | 41/2REG | 7408 |
5LZ165.5×7.0V | 215-244 | 81/eight-ninety five/8 | 18-30 | four. | a hundred and twenty-one hundred eighty | 5135 | 8987 | seventy two-108 | ninety | a hundred and eighty | 41/2REG | 41/2REG | 7748 |
5LZ172×7.0V | 215-244 | 81/8-ninety five/eight | eighteen-thirty | 4. | a hundred and twenty-180 | 5135 | 8987 | seventy two-108 | 90 | 180 | forty one/2REG | forty one/2REG | 7391 |
5LZ172.5×7.0V | 215-244 | eighty one/eight-95/eight | 20-35 | four. | 115-one hundred eighty | 6452 | 11299 | 86.four-151.2 | 100 | two hundred | forty one/2REG | 41/2REG | 8031 |
7LZ172.5×7.0V | 215-244 | 81/eight-ninety five/eight | twenty-35 | 4. | seventy five-180 | 6527 | 11420 | 59.5-108.6 | eighty | a hundred and sixty | forty one/2REG | forty one/2REG | 8631 |
5LZ185×7. | 215-244 | eighty one/8-95/8 | twenty-35 | four. | 184 | 5436 | 8154 | eighty-140 | a hundred and twenty | 240 | 41/2REG | sixty one/2REG | 8120 |
5LZ185.5×7. | 215-244 | 81/eight-ninety five/eight | 20-35 | 4. | 173 | 5939 | 8908 | 80-140 | a hundred and twenty | 240 | 41/2REG | sixty one/2REG | 8120 |
5LZ197×7. | 244-311 | 91/eight-125/eight | 20-40 | three.two | sixty one-122 | 14118 | 14118 | fifty seven.six-115.2 | one hundred twenty | 240 | 51/2REG | 65/8REG | 7998 |
5LZ197.5×7. | 244-311 | 95/eight-121/four | twenty-40 | 4. | eighty five-one hundred sixty | 12640 | 12640 | 72-a hundred and forty four | one hundred thirty | 260 | fifty one/2REG | 65/8REG | 8598 |
7LZ203×7. | 244-311 | ninety five/8-121/4 | 20-forty | 3.two | 70-one hundred fifty five | 12289 | 12289 | 57.6-126.seven | a hundred and fifty | 240 | 51/2REG | 65/8REG | 7798 |
5LZ203.5×7. | 244-311 | 95/8-121/four | twenty-forty | four. | 70-155 | 8778 | 15362 | seventy two-158.4 | 170 | 260 | fifty one/2REG | 65/8REG | 8598 |
5LZ216×7. | 273-323 | 103/four-123/4 | 22-forty eight | 3.2 | sixty one-138 | 8895 | 15567 | sixty three.36-138.29 | one hundred ninety | three hundred | 65/8REG | 65/8REG | 7756 |
5LZ216.5×7. | 273-323 | 103/4-123/4 | 22-48 | four. | sixty one-138 | 11117 | 19455 | 79.2-172.eight | 238 | 378 | 65/8REG | 65/8REG | 8546 |
5LZ244×7. | 311-445 | 121/two-171/two | 50-seventy five | 3.two | ninety one-136 | 15124 | 26468 | 144-216 | two hundred | 360 | sixty five/8REG | seventy five/8REG | 8635 |
7LZ244.5×7. | 311-445 | 121/2-171/two | fifty-seventy five | 4. | 91-136 | 18905 | 33085 | 180-270 | 250 | 450 | 65/8REG | 75/8REG | 9235 |
Downhole motor
Down-hole motor is a positive-displacement motor. It converts high fluid electrical power into mechanical vitality of bit rotation. Down-hole motor is broadly used for drilling, deflecting, azimuth management, coring, reaming, facet tracking drilling and workover for horizontal effectively, cluster wells and straight well of oilfields and coal mines. In addition, it is ideal for complicated drilling
Glorytek offers a variety of sizes of down-gap motors for hole sizes from 1 7/8″ to 26″. Popular measurements are 1 11/16″, 2 7/eight”, 3 1/eight”, 3 1/2″, 3 3/4″, 4″, 4 3/4″, 5″, 5 5/sixteen”,five seven/eight”, 6 1/4″, 6 1/2″, 6 3/four”, 7 1/4″, 7 3/four”, 8″,eight 1/four”, 8 1/two”, nine”, 9 5/8″ and eleven 1/four”.
Glorytek is capable to give down-hole motors of unique size, large-pace, medium-velocity and reduced-speed, in accordance to customer’s needs
Downhole Motor Operating Theory
Downhole motor is a kind of downhole dynamic drilling resource on the energy of drilling mud. Mud stream from the outlet of mud pump flows by way of a by-pass valve into the motor. This stream makes strain loss at both inlet and outlet of the pump, to drive the rotor into rotating, and to transmit the torque and pace on to the bit. The downhole motor property mainly relies upon upon its house parameters.
Constitution of Downhole Motor
Downhole motor is composed of five assemblies of bearing, power segment, coupling, anti-drop and bypass valve.
Features
Characteristics of Substantial Stream Rate Down-hole Motor |
Attributes of Uniform Wall Thickness Down- hole Motor |
The adoption of hollow rotor cooperating with hard alloy jet nozzle of diverse sizes will increase enter flow rate and proppant carrying capability. |
This down-hole motor can properly remedy the dilemma of uneven thickness of motor’s rubber. Its characteristics are as follows: higher stress enduring for solitary quality, big output electrical power, broad range of high effectiveness, and so forth. |
Characteristics of Bent Angle Adjustable Down-hole Motor |
Attributes of Around Bit Down-gap Motor |
The bend angle of down-hole motor can be adjusted on wellhead. Stabilizers of various shapes and dimensions can be changed according to various specifications. |
Measure position of measuring instrument is mounted in downhole motor, which is nearer to drilling bit. Drill monitor is much more precise and trustworthy. |
Characteristics of Regular Down-gap Motor |
Functions of Saturated Saltwater Mud Resistant Down-hole Motor |
Regular energy area the transmission shaft is lubricated by drilling fluid available in vertical, one-bend and double-bend types greatest functioning temperature is 120°C. |
The specific coating layer of rotor has much better capacity of corrosion and wear resistance, enabling down-hole motors to operate a long time in saturated saltwater mud. |
Functions of Oil-sealed Transmission Shaft Down-hole Motor |
Features of High Temperature Resistant Down-gap Motor |
The working atmosphere of thrust bearing and radial bearing is improved, and the doing work time of down-hole motor for the duration of 1 solitary vacation is elevated. |
The stator is geared up with excellent good quality large temperature resistant rubber, which allows down-gap motor to perform stably for a long time below the gap in which temperature even reaches 150°C and180°C. |
Features of Prolonged Down-gap Motor |
Functions of High Deflection Down-gap Motor |
The torque is increased by thirty% to sixty% compared with CZPT down-gap motors the transmission shaft is lubricated by drilling fluid obtainable in vertical, one- bend and double-bend varieties optimum functioning temperature: 120°C. |
The exclusive construction can make the motor shorter, the bending level nearer to drill little bit, and increased construct-up charge. |
Related CZPT
>> Packing and Transport
Packing: Common packing.
Shipping and delivery: Generally twenty times right after your payment.
>> Organization Profile
Glorytek CZPT (ZheJiang )Co.,Ltd.,
positioned in ZheJiang , China, is an built-in corporation specialized in producing and exporting top top quality drilling gear and drilling parts for a long time. We are supported and assisted by a highly skilled staff of designers and engineers that empower us to comprehensive all the assigned projects productively as for each the specified requirement from our customers.
Our goods are widely utilized in the scope of mining, drinking water effectively drilling and exploration, anchor grouting venture, side slope protection engineering, oil and fuel engineering,underwater rock drilling & blasting functions of seaport channel, hydropower project, countrywide protection projects ect.
>> Certifications
>> Newest Exhibition
>> Buyer Photos
>> Soon after-sale Guarantee
(1) Free of charge modify once the difficulty caused by the top quality concern.
(2) Well timed following-sale support shall be supplied all the time.
>> FAQ
Q: Are you CZPT maker or investing company?
A: We are an integrated corporation specialized in production and exporting.
Q: Can you supply connected drilling instruments?
A: Sure, we can supply full established of drilling resources, this sort of as drill pipe, tricone little bit, PDC bit, drag bit, DTH Hammer. Moreover, we
have drilling equipments like rigs, mud pump, CZPT, etc. as well.
Q: Which payment conditions can you settle for?
A: Generally we choose thirty% progress payment after acquire get by T/T, 70% remaining payment prior to delivery by T/T. And 100% progress payment right after purchase get by T/T for small orders.
Q: How is your shipping and delivery time?
A: This will count on your purchasing quantity. Generally it will be about 20 days right after we obtain your payment.
Q: How can you make certain the quality?
A: We have our specialist QC staff and all the products will be rigorous inspection and testing for every get prior to shipping and delivery out.
>> Contact Us
Jane Cheng
Income Representative
Glorytek CZPT ( ZheJiang ) Co., Ltd.
Tackle:No.B-2507, Xihu (West Lake) Dis.WeiCheng, GuanZhuang,Chao Yang District, ZheJiang , China.
Tel: -ten-52864265/52864786
Fax: -10-5257170
Mobile:-13426425710
Website: