SMC Production Line, Automatic SMC Production Line

SMC Production Line, Automatic SMC Production Line

SMC Manufacturing Line

Completely CZPT Resin Mixing Functions

  1. The management technique is managed by PLC system, which can comprehend automatic loading.
  2. The resin is first set in according to the formulation amount set by the program, and is routinely stopped when the formulation sum is reached, and then routinely stopped when the reduced shrinkage agent is place into the formulation volume.
  3. A resin feed port, a low shrinkage agent feed port and a styrene feed port, a filler feed port are reserved on the Stirring Kettle.
  4. The PLC can shop a number of different SMC recipes, which can be utilised by quantity.
  5. Stirring kettle is created of 201 stainless metal for toughness.
  6. The resin is transported using an imported equipment pump or a screw pump with a circulation fee of four-six cubic meters per hour.
  7. Each the Stirring Kettle and the resin storage tank have temperature sensors for monitoring the temperature of the resin paste.
  8. The calcium carbonate feed is a vacuum suction conveying method, and the charging time of each calcium carbonate is about ten minutes.

Completely CZPT Manufacturing Line Mixing Method Functions

  1. Composed of a few sets of large viscosity gear pumps, mixers and digital management systems
  2. The A, B, and C pumps are pushed by servo motors. In the creation condition, the B and C pumps keep track of the A pump to form a closed-loop management, and are equipped with a mass flow meter with a precision of three thousandths.
  3. B, C pump comes with a discharge barrel, the capacity is a hundred liters and fifty liters
  4. The B and C pumps are all transported by the US CZPTn gear metering pump. The A pump uses a Wicken gear pump or an imported screw pump. The A, B, and C pumps are equipped with flowmeters for checking the movement fee of the resin paste magnesia paste and the shade paste. When any of the components A, B, and C are interrupted, the on the internet method instantly stops.

 

Parameters

 

Title

Device

Worth

Remark

Title of equipment

 

SMC Creation Line

 

Model

 

SMC-1200

 

CZPT film width

mm

1300

 

CZPT Max. diameter

mm

four hundred

 

SMC Sheet width

mm

Max. 1200

 

Efficiency

m/h

3-seven-hundred

Adjustable

Resin paste viscosity

Mpas

10000-35000

In accordance to the formulation

Fiber content ten%-40%

According to person needs

Blade hole

mm

≤0.03

 

Fiberglass model

tex

2400-4800

 

Quantity of glass fibers

1/set

32-forty two

two sets

Fiberglass length

mm

twelve.five-25-37.five-fifty

Set by blade

Slicer

Established

two

 

Fiber dispersion uniform system

Set

2

 

Exhaust system

Set

5

 

Dipping zone pace

m/min

3-twenty

Adjustable

Dipping zone mesh belt width

mm

1250

 

Dipping zone size

mm

5140

 

Primary motor energy

KW

four.five

Servo motor

Chopping motor

KW

two.two*two

Servo motor

Winding motor

KW

2.2

Servo motor

Dimensions

mm

13500 x2400 x2800

 

SMC Production Line, Automatic SMC Production Line