Centrifugal Horizontal CZPT Chrome alloy AH Slurry Pump
Introduction:
one. HS series slurry pump is designed for the ongoing pumping of high abrasive, higher density slurries with nominal routine maintenance requirements. The wearing parts are made of extremely chrome or and rubber. It will preserve large effectiveness in excess of the wear daily life of its elements.
two. The metallic wet elements and rubber kinds can be interchangeable for dealing with diverse liquids or slurries.
three. HS slurry pumps are available in dimensions ranging from 1 inch to 18 inch discharge and function high efficiency overall performance able of flow charges from 10.eight to 5400 m³/h and heads up to a hundred twenty five meters for large head designs.
Functions:
1. Cylindrical structure of bearing assembly: convenient to alter the place between impeller and entrance liner
and can beremoved completely
2. Interchangeable anti-abrasive damp components produced of high-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs supply substantial working force capabilities
and an extra evaluate of basic safety.
4. The discharge branch can be oriented to any 8 positions at the interval of 45 degrees
five. A variety of drive varieties: DC(direct link), V-belt generate, gear box reducer, hydraulic couplings, VFD,
SCR handle, and many others
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Normal Application:
| • CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
| • Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina CZPT | • Energy Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Model | Max Electricity (Kw) |
Inlet & Outlet dimensions (inch) | Material for Put on Elements | Stream Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.five/one | M | twelve.six~28.eight | 3.5~8 | six~sixty eight | 1200~3800 | 152 |
| R | 10.8~twenty five.2 | three~7 | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/one.5 | M | 32.four~seventy two | nine~20 | 6~58 | 1200~3200 | 184 |
| R | twenty five.two~fifty four | 7~15 | 5.5~41 | 1000~2600 | 178 | |||
| 50HS-C | thirty | three/two | M | 39.6~86.4 | eleven~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/3 | M | 86.four~198 | 24~fifty five | 9~fifty two | 1000~2200 | 245 |
| R | 79.2~180 | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | six/four | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
| R | 144~324 | 40~ninety | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | eight/six | M | 360~828 | one hundred~230 | ten~sixty one | 500~1140 | 510 |
| R | 324~720 | 90~200 | seven~forty nine | four hundred~one thousand | 510 | |||
| 200MS-E | one hundred twenty | ten/eight | M | 666~1440 | 185~four hundred | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | 170~380 | eleven~sixty one | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
| R | 720~1620 | 200~450 | seven~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | thirteen~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven hundred | 13~forty four | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven-hundred~1500 | thirteen~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | thirty | one.five/one | M | 16.2~34.2 | 4.5~nine.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | three/2 | M | 68.four~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | four/three | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/four | M | 324~720 | ninety~two hundred | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | a hundred thirty~280 | 20~ninety four | 500~a thousand | 711 |
For the substance of putting on elements,
“M” = metal, extremely chromium alloy “R” = anti-abrasive rubber
Get in touch with
Welcome to make contact with us any time for particulars.
Your inquiry will get our prompt attention and response !