Introduction:
1. HS series slurry pump is designed for the constant pumping of high abrasive, higher density slurries with small routine maintenance needs. The donning components are created of ultra chrome or and rubber. It will sustain higher performance in excess of the dress in daily life of its parts.
2. The metallic damp parts and rubber kinds can be interchangeable for dealing with diverse liquids or slurries.
three. HS slurry pumps are offered in dimensions ranging from 1 inch to eighteen inch discharge and attribute higher effectiveness performance able of stream costs from ten.eight to 5400 m³/h and heads up to a hundred twenty five meters for high head types.
Attributes:
one. Cylindrical construction of bearing assembly: handy to adjust the room between impeller and front liner
and can beremoved fully
2. Interchangeable anti-abrasive moist components manufactured of high-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs supply high working pressure capabilities
and an additional evaluate of safety.
four. The discharge department can be oriented to any 8 positions at the interval of forty five levels
five. A variety of generate kinds: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR handle, and many others
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Typical Application:
• CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
• Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
• Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • CZPT |
• Alumina CZPT | • Power Plant | • Potash Fertilizer Plant | • Other industries |
• Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
Product | Max Energy (Kw) |
Inlet & Outlet dimensions (inch) | Substance for Dress in Components | Movement Fee (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | 15 | one.5/one | M | twelve.6~28.eight | three.5~8 | 6~68 | 1200~3800 | 152 |
R | 10.eight~twenty five.two | 3~seven | 7~52 | 1400~3400 | 152 | |||
40HS-B | fifteen | 2/1.5 | M | 32.4~seventy two | 9~twenty | six~fifty eight | 1200~3200 | 184 |
R | 25.two~fifty four | seven~fifteen | five.five~41 | one thousand~2600 | 178 | |||
50HS-C | 30 | three/two | M | 39.6~86.four | 11~24 | twelve~64 | 1300~2700 | 214 |
R | 36~75.six | 10~21 | thirteen~forty six | 1300~2300 | 213 | |||
75HS-C | 30 | four/3 | M | 86.four~198 | 24~fifty five | 9~fifty two | 1000~2200 | 245 |
R | seventy nine.2~one hundred eighty | 22~50 | 5~34.five | 800~1800 | 245 | |||
100HS-D | 60 | six/4 | M | 162~360 | 40~a hundred | twelve~56 | 800~1550 | 365 |
R | one hundred forty four~324 | 40~ninety | 12~45 | 800~1350 | 365 | |||
150HS-E | a hundred and twenty | 8/six | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
R | 324~720 | 90~two hundred | seven~49 | 400~1000 | 510 | |||
200MS-E | a hundred and twenty | 10/8 | M | 666~1440 | 185~four hundred | fourteen~sixty | 600~1100 | 549 |
200HS-ST | 560 | ten/eight | M | 612~1368 | one hundred seventy~380 | eleven~sixty one | four hundred~850 | 686 |
R | 540~1188 | 150~330 | 12~fifty | four hundred~750 | 686 | |||
250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
R | 720~1620 | two hundred~450 | 7~forty five | 300~650 | 762 | |||
300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
R | 1152~2520 | 320~700 | 13~44 | three hundred~five hundred | 965 | |||
350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
450HS-TU | 1200 | 20/18 | M | 2520~5400 | seven hundred~1500 | thirteen~57 | two hundred~four hundred | 1370 |
25HHS-C | 30 | 1.five/1 | M | 16.2~34.two | 4.5~9.5 | 25~ninety two | 1400~2200 | 330 |
50HHS-D | 60 | three/two | M | sixty eight.four~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
100HHS-E | a hundred and twenty | 6/4 | M | 324~720 | 90~200 | thirty~118 | 600~1000 | 711 |
150HHS-S | 560 | eight/6 | M | 468-1008 | one hundred thirty~280 | twenty~94 | five hundred~1000 | 711 |
For the content of donning parts,
“M” = metal, extremely chromium alloy “R” = anti-abrasive rubber
Make contact with
Welcome to speak to us any time for specifics.
Your inquiry will get our prompt attention and reaction !