| Model | Suction capacity (L/S) |
Restrict vacuum (≤Pa) |
Speed (rpm) |
Motor Electricity (kw) |
Inlet Dia. (mm) |
Outlet Dia. (mm) |
Bodyweight (Kg) |
Advised backing pump product |
| ZJ-70 | 70 | 6×10-two | 2780 | 1.5 | 80 | fifty | 87 | 2X-8 |
| ZJB-70 | 5×10-two | 100 | ||||||
| ZJ-150A | 150 | 6×10-two | 2900 | 3 | 100 | 100 | 198 | 2X-fifteen |
| ZJB-a hundred and fifty | 5×10-two | 215 | ||||||
| ZJ-three hundred | 300 | 6×10-2 | 1450 | 4 | 150 | 150 | 490 | 2X-30A |
| ZJB-300 | 5×10-2 | 480 | ||||||
| ZJ-600 | 600 | 6×10-two | 2900 | 5.five | one hundred fifty | 150 | 490 | 2X-70A |
| ZJB-600 | 5×10-two | 503 | ||||||
| ZJ-1200A | 1200 | 6×10-2 | 1450 | 11 | 300 | 300 | 1550 | 2X-70A (2sets) |
| ZJB-1200 | 5×10-2 | 250 | 250 | 1580 |
ZJ Sequence Roots vacuum pump
1. CZPT characteristics and working principle of the pump:
Model ZJ CZPT Booster Pump, also known as a Roots pump, is a volumetric pump.
It employs a pair of rotors, similar and in 8-determine with specific clearance between them
in the pump housing, rotating at the same speed in opposite instructions to carry out
function of suction and discharge of gas. The two rotors are supported by rolling bearings
in the stop covers of the pump, rotating at substantial pace and are retained at a
set relative situation by a pair of timing gears. The finish clearance between rotors and
finish covers are set by adjustable steel shims among the bearing housings and the
conclude protect at the fixed conclude, which makes certain one-path growth of the rotor when
temperature rises in the course of its procedure.
Four sets of interior seals (also known as piston ring) in the two finish covers stop lube oil
moving into into the pump housing. The shaft seal at the front-conclude cover, also referred to as as
framework oil seal or shaft seal, prevents leakage of air into the pump housing.
In purchase to reduce temperature of the pump, all versions of pumps (assume the two
smallest models) are geared up with a gearbox cooler and entrance-end cover cooler.
Electricity is transmitted through a coupling or V-belt from the motor to the driving shaft of
the pump and then through synchronizing gears to the driven shaft
Product’s Application
Product Screen
Firm Electricity
FAQ
one.Q:Are you a company or investing firm?
A: We are a specialist vacuum pump manufacturer with over 32 calendar year expertise. We have two factories now which go over more than 33333 sq. meters,we have rich expertise in sound liquid industry , Welcome to check out our manufacturing facility at your time.
two.Q:Do you have bare minimum purchase quantity request?
A: for spare components we have no MOQ,but for total established equipment of training course 1 established is the bare minimum.
3.Q:Do you have certificates?
A: Of course, we have CE, ISO,SGS.etc. certificates.
five.Q:How to shell out?
A:T/T and Alibaba Payment is acceptable.
six.Q:How to pack the products?
A: We use CZPT export package. If you have particular package requirements, we will pack as you needed, but the costs will be compensated by consumers.
7.Q: What about your delivery time?
A: It depends on your pump amount. CZPTly 15 days following we receive the prepayment. We will validate you again when we start off to generate.
8.Q:How to put in following the tools arriving destination?
A: We will despatched the functioning instruction with products to you.Remember to strictly adhere to the guidelines for installation
9.Q: How extended does your solution top quality guarantee final?
A: 12 months for all our products against any non-synthetic good quality dilemma since the product depart our manufacturing unit.
ten.Q: What will you do with good quality complaint?
A: We have a full established of microcomputer controlled testing technique(All products are matter to analyzed prior to shipping and delivery. No solution that failed functionality take a look at leaves our manufacturing facility.