Waste Pet Bottles Recycled Granulation Machine Pelletizing Machine Pelletizer

Waste Pet Bottles Recycled Granulation Machine Pelletizing Machine Pelletizer

 

waste PET bottles recycled granulation device/pelletizing machine/pelletizer, PET cans and so on. The equipment with High-torque twin-screw extruding screw device, this  is a new-technology high-speed, substantial-torque and large-energy twin screw extruder recognizing technological marketing based on the present item by drawing knowledge from the sophisticated manufacturing technologies in China.

 

The positive aspects of this device
1. Extremely efficent: the device is computerized and with much less electrical power use.
2. Unique screw design and style: We will design and style the screw up to consumer distinct content and the content of screw and barrel can be 38CrMoAL or bimetallic.
3. This device can have out perfect viscosity of PET with out challenging precystallization dryer program. Only a little bit IV will be diminished. It can enhance IV in the problem of incorporating some suitable additive.
5. The equipment wih long lifestyle.

other kind of these sorts of machine

Model

TSSK20

TSSK30

TSSK35

TSSK50

TSSK65

TSSK72

TSSK92

CZPT diameter(mm)

21.seven

thirty

35.6

fifty.5

62.four

71.two

91

Rotary speed(rpm)

600

400

400/600

500/600

400/five hundred

400/500

four hundred/500

Major motor power(kw)

four

11

11/fifteen

37/forty five

55/seventy five

90/a hundred and ten

220/250

L/D

32-40

28-48

32-forty eight

32-forty eight

32-forty eight

32-48

32-40

Potential(kg/h)

two-ten

5-thirty

ten-eighty

20-a hundred and fifty

a hundred-three hundred

three hundred-600

600-a thousand

Structure of the device

More specifics equipment photoes
Crystallization dryer: dryer the PET flakes in advance
Vulume: 1000L.
Heater electricity: 36kW
Heat way: by electrical
Blower electricity : 4kW
Mixer power: 2.2kW
Mixer shaft: SS304
Material: Inside stainless steel, outside A3, With heat insulation layer.
With the open up door on the hopper, it will be effortlessly work.

Solitary screw feeder  For feeding the flakes into the extruder:
Feed the PET flakes into the extruder, single screw feeder, feeding the materials equally and stably.
Horizontal screw parameter:
CZPT diameter:φ60
Energy:1.5kw
Material of hopper: SS304
There is sight glass on the hopper, worker can be see the substance in the hopper

Twin screw extruder machine
Barrel amount: ten
Size of barrel #one-10 is 234mm
Overall size of barrels: ~2340mm
Barrel #one-9 produced of 38CrMoAl materials, Hardened to ≥61HRC
The barrel segment are cooled with drinking water, each barrel adopts one throttle and solenoid valve, and solenoid valve imported from Italy.
Barrel#1 open for feeder, Barrel#four: open barrel, for all-natural degassing, Barrel#six, Barrel#68: open up barrel, for vacuum degassing. The other folks is closed.
The processing area is presented with stainless metal protect as a defense in opposition to.
Diameter :sixty two.4 mm L/D: 36:1
Centre distance: 52mm
Content of screw: W6Mo5Cr4V2
CZPT speed (counter rotating): 400RPM
A pair of screw shafts, total with screw aspects, screw shafts  materials is 40CrNiMo, Hardened to ≥61HRC

The materials come out from the die(pull lure like noodles pelletizing way, PET need to use this pelletizing way. And the its want very good vacuum, like roots pump, then the pellets will be significantly far better)

CZPT for the screw( h2o controlled by electric valves)

CZPT components of the equipment

Vacuum, we can use Roots vacuum or Bipolar pump.

Degassing on the extruder

Water tank
Material arrive from the die and go into the water tank for cooling, There is rubber roller in the tank, substance strap can be send out into gale dryer to blower the water on its area.
Duration of tank : 4m,
Materials of tank is SS304, Materials of bracket :Q235
It Can be moved up and down, ahead and back again up to the die and materials essential.
Power of blower on gale dryer:2.2kW

Pelletizer
A. Portal formed type pelletizer,horniness alloy rotary cutter
B. capability:300kg/hr
C. motor electricity:4KW
D. Cutter diameter: 300mm
E. Blade width: 20mm
F. Traction pace :thirty-90m/min
G. No. of cutter gears: 32
H. Max quantity of strains: much less than sixty
Last pellets and Raw material

If you want  more particulars of this sort of equipment kindly make contact with me, I can send you more detail photoes and  vedios.

1. We supply below necessary paperwork with the device:

  1. CZPT format
  2. CZPTtricity diagram
  3. CZPT certificate
  4. CZPT guide book/routine maintenance e-book

2. We offers one particular-12 months good quality ensure. During this period, if the machine’s malfunction is approved to be our responsibility, we will deliver the damaged spare parts to you with DHL courier or other way inside 7 workdays soon after getting the complainant. And send the professionals to the buyer’s manufacturing unit for maintaining. All charges are in our account.

three. Right after 1 year assure, If you want we can provides payable spare elements and technician’s Browsing servicing, and any broken spares we can send out you quickly as possible.

4. We trust that our quotation fulfills with your demands and we will gladly furnish you with additional details.

5. 24Hours services :  Cell-139157 0571 8
                             

Waste Pet Bottles Recycled Granulation Machine Pelletizing Machine Pelletizer