Centrifugal Horizontal Slurry Pums Introduction:
one. HS series slurry pump is made for the continuous pumping of large abrasive, high density slurries with minimal maintenance needs. The putting on areas are manufactured of ultra chrome alloy or rubber. It will maintain large efficiency in excess of the dress in existence of its elements.
2. The metallic wet components and rubber kinds can be interchangeable for dealing with distinct liquids or slurries.
three. HS slurry pumps are available in sizes ranging from one inch to 18 inch discharge and attribute large efficiency performance capable of circulation rates from ten.8 to 5400 m³/h and heads up to one hundred twenty five meters for higher head designs.
4. CZPTurethane Components can be interchangeable with rubber types.
Characteristics:
one. Cylindrical construction of bearing assembly: handy to modify the room among impeller and front liner
and can beremoved fully
two. Interchangeable anti-abrasive moist parts manufactured of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs offer large running force abilities
and an extra measure of security.
four. The discharge department can be oriented to any 8 positions at the interval of forty five degrees
5. Different generate kinds: DC(direct relationship), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR control, and many others
6. The shaft seal employs the packing seal, expeller seal and mechanical seal
Normal Application:
| • CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
| • Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina CZPT | • Energy Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Product | Max Energy (Kw) |
Inlet & Outlet measurement (inch) | Material for Wear Components | Circulation Fee (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.five/one | M | twelve.6~28.eight | 3.five~eight | 6~68 | 1200~3800 | 152 |
| R | ten.8~25.2 | 3~7 | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/1.five | M | 32.4~seventy two | nine~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | twenty five.2~54 | seven~fifteen | five.5~41 | one thousand~2600 | 178 | |||
| 50HS-C | thirty | three/2 | M | 39.six~86.four | eleven~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.6 | 10~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/three | M | 86.4~198 | 24~55 | 9~fifty two | one thousand~2200 | 245 |
| R | 79.two~one hundred eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~100 | twelve~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | forty~ninety | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | eight/six | M | 360~828 | a hundred~230 | 10~sixty one | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | seven~49 | four hundred~a thousand | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~four hundred | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | 170~380 | 11~sixty one | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | 12~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~68 | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven hundred~1500 | 13~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | thirty | one.5/1 | M | 16.2~34.two | four.5~9.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | 68.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | 6/four | M | 324~720 | ninety~two hundred | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | a hundred thirty~280 | 20~ninety four | five hundred~1000 | 711 |
For the materials of donning elements,
“M” = metallic, ultra chromium alloy “R” = anti-abrasive rubber
Welcome to contact us 7×24 for much more information.
Any of your inquiry or tips will get our prompt interest and reaction !