SS316L Pressured circulation evaporator for Nacl crystallization
This is a Program for Ammonium Sulfate manufacturing named Double Impact Forced Kind Circulation Evaporation Crystallizer, Or Double Result OSLO Crystallizer. feeding is liquid, closing merchandise is the salt for offering.
Double Effect Pressured Sort Circulation Evaporation Crystallizer is functioning beneath vacuum, so it is energy conserving. forced sort pump also assist for slurry crystal liquid stream, ignore pipeline blocking or scaling.
Double Influence Compelled Sort Circulation Evaporation Crystallizer mixed with 1st influence heater, 1st impact separator, 2nd influence heater, 2nd effect separator, 1st preheater, 2nd preheater, 3rd preheater, 4th preheater,and condenser, pumps, pipeline and valves and so forth.
Double Influence Compelled Type Circulation Evaporation Crystallizer is also fit for continue manufacturing of : Sodium Sulfate, Ammonium Sulfate, Tomato Paste production, NaCl , lithium carbonate ,high salt squander water and many others.
This device is CZPT with conductive oil heating with secure temperature of 200-220ºC
Subsequent is the photograph which equipment set up in client’s manufacturing unit:
1. Introduction for forced circulation evaporator
1) . Double impact compelled circulation evaporator
Design : GLFC-02-XXXX
Handing capability ( (T/hr ) : two,four,5,6,ten,11…
2) . Single impact forced circulation evaporator :
Design : GLFC-02-XXXX
Handing potential ( T/ hr ) : 1,1.5,2…
2. Application Location :
It is ideal for the evaporation and crystallization of components with substantial focus, higher viscosity, insoluble solids and so on .
For case in point, the recovery of sodium chloride, sodium sulfate, ammonium chloride, ammonium sulfate, and so on.
three. Mostly parameter :
1). The concentration ratio is large and the circulation type is pressured, so that the liquid with greater viscosity is effortless to flow and evaporate.
two).Via the compelled circulation, the evaporator can be heated evenly in the tube and can stop the “dry wall” phenomenon.
three).The disadvantages are mainly the massive volume of the pump and the fairly large electrical energy usage. At the exact same time, due to the big stream of the pump, the products will vibrate tremendously and it must be attached to the help of the workshop or the metal structure.
Evaporator, separator (crystallizer), condenser, circulation pump, inter action pump or substance control valve, vacuum and drainage program, sub cylinder, operation platform, electrical instrument handle cupboard, valve and pipeline program.