Introduction:
one. HS series slurry pump is developed for the steady pumping of substantial abrasive, high density slurries with nominal servicing requirements. The wearing components are produced of ultra chrome or and rubber. It will preserve large performance in excess of the use existence of its elements.
2. The metallic wet areas and rubber ones can be interchangeable for handling distinct liquids or slurries.
three. HS slurry pumps are offered in dimensions ranging from one inch to 18 inch discharge and characteristic substantial efficiency overall performance able of circulation prices from ten.8 to 5400 m³/h and heads up to one hundred twenty five meters for substantial head types.
Attributes:
one. Cylindrical structure of bearing assembly: hassle-free to change the space amongst impeller and front liner
and can beremoved completely
two. Interchangeable anti-abrasive damp areas produced of large-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs offer large functioning stress abilities
and an extra measure of security.
4. The discharge department can be oriented to any 8 positions at the interval of forty five degrees
5. Various travel sorts: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD,
SCR handle, and so forth
6. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Normal Software:
| • CZPT | • CZPT processing | • Coal prep | • Cyclone feeds |
| • Tunnel | • CZPT slurries | • Tailings | • Mill grinding |
| • Ash handing | • Paper and Pulp | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina CZPT | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| Design | Max Energy (Kw) |
Inlet & Outlet size (inch) | Content for Use Parts | Movement Rate (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | 1.5/one | M | 12.6~28.eight | three.five~eight | 6~sixty eight | 1200~3800 | 152 |
| R | 10.8~25.two | 3~7 | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.five | M | 32.four~72 | 9~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | 25.2~fifty four | seven~15 | 5.5~forty one | a thousand~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.six~86.four | eleven~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~75.six | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/3 | M | 86.4~198 | 24~55 | nine~fifty two | a thousand~2200 | 245 |
| R | seventy nine.2~a hundred and eighty | 22~fifty | 5~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | six/four | M | 162~360 | 40~a hundred | 12~56 | 800~1550 | 365 |
| R | a hundred and forty four~324 | forty~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/6 | M | 360~828 | one hundred~230 | 10~61 | 500~1140 | 510 |
| R | 324~720 | ninety~two hundred | 7~49 | four hundred~a thousand | 510 | |||
| 200MS-E | a hundred and twenty | 10/eight | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | a hundred and seventy~380 | eleven~sixty one | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | 12~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven hundred | thirteen~44 | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | thirteen~57 | two hundred~400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | 16.2~34.two | 4.five~9.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | 68.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/4 | M | 324~720 | 90~200 | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | a hundred thirty~280 | 20~94 | 500~one thousand | 711 |
For the content of donning parts,
“M” = metal, extremely chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to make contact with us any time for particulars.
Your inquiry will get our prompt attention and reaction !