PP PE PET PVC Ab muscles recycle pelletizing machine/granulation equipment/PET granulator/PET pelletizer. The machine with High-torque twin-screw extruding screw unit, this is a new-technology large-pace, substantial-torque and substantial-power twin screw extruder acknowledging technological advertising primarily based on the current merchandise by drawing experience from the innovative producing technologies in China.
The advantages of this machine
1. Extremely efficent: the equipment is computerized and with less electricity consumption.
two. Particular screw layout: We will layout the screw up to consumer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. This device can carry out perfect viscosity of PET with out complex precystallization dryer technique. Only a little bit IV will be diminished. It can improve IV in the problem of including some suitable additive.
five. The machine wih long existence.
other type of these sorts of machine
Design |
TSSK20 |
TSSK30 |
TSSK35 |
TSSK50 |
TSSK65 |
TSSK72 |
TSSK92 |
CZPT diameter(mm) |
21.seven |
thirty |
35.six |
fifty.five |
sixty two.four |
71.2 |
91 |
Rotary pace(rpm) |
600 |
four hundred |
400/600 |
500/600 |
four hundred/500 |
400/five hundred |
four hundred/five hundred |
Principal motor electricity(kw) |
four |
eleven |
eleven/15 |
37/forty five |
55/seventy five |
ninety/110 |
220/250 |
L/D |
32-40 |
28-48 |
32-48 |
32-forty eight |
32-48 |
32-48 |
32-forty |
Capacity(kg/h) |
2-10 |
5-30 |
ten-80 |
twenty-150 |
a hundred-three hundred |
three hundred-600 |
600-one thousand |
Layout of the machine
More specifics equipment photoes
Crystallization dryer: dryer the PET flakes in advance
Vulume: 1000L.
Heater energy: 36kW
Warmth way: by electric
Blower electrical power : 4kW
Mixer electricity: 2.2kW
Mixer shaft: SS304
Substance: Inside stainless metal, outside A3, With heat insulation layer.
With the open up door on the hopper, it will be easily run.
Solitary screw feeder For feeding the flakes into the extruder:
Feed the PET flakes into the extruder, one screw feeder, feeding the materials similarly and stably.
Horizontal screw parameter:
CZPT diameter:φ60
Electrical power:1.5kw
Material of hopper: SS304
There is sight glass on the hopper, employee can be see the materials in the hopper
Twin screw extruder machine
Barrel number: ten
Length of barrel #1-10 is 234mm
Whole duration of barrels: ~2340mm
Barrel #1-9 made of 38CrMoAl materials, Hardened to ≥61HRC
The barrel part are cooled with water, each and every barrel adopts single throttle and solenoid valve, and solenoid valve imported from Italy.
Barrel#1 open up for feeder, Barrel#four: open up barrel, for normal degassing, Barrel#six, Barrel#68: open up barrel, for vacuum degassing. The other people is closed.
The processing part is provided with stainless metal cover as a protection against.
Diameter :sixty two.four mm L/D: 36:one
Centre distance: 52mm
Materials of screw: W6Mo5Cr4V2
CZPT speed (counter rotating): 400RPM
A pair of screw shafts, comprehensive with screw factors, screw shafts content is 40CrNiMo, Hardened to ≥61HRC
The substance occur out from the die(pull trap like noodles pelletizing way, PET need to use this pelletizing way. And the its need to have good vacuum, like roots pump, then the pellets will be significantly much better)
CZPT for the screw( h2o controlled by electrical valves)
CZPT components of the machine
Vacuum, we can use Roots vacuum or Bipolar pump.
Degassing on the extruder
Water tank
Material occur from the die and go into the h2o tank for cooling, There is rubber roller in the tank, substance strap can be send into gale dryer to blower the drinking water on its surface.
Length of tank : 4m,
Content of tank is SS304, Material of bracket :Q235
It Can be moved up and down, ahead and back again up to the die and materials required.
Power of blower on gale dryer:two.2kW
Pelletizer
A. Portal shaped sort pelletizer,horniness alloy rotary cutter
B. capacity:300kg/hr
C. motor energy:4KW
D. Cutter diameter: 300mm
E. Blade width: 20mm
F. Traction pace :30-90m/min
G. No. of cutter gears: 32
H. Max variety of lines: much less than 60
Final pellets and Uncooked material
If you need to have more details of this kind of equipment kindly make contact with me, I can ship you much more element photoes and vedios.
one. We offer under required paperwork with the device:
- CZPT layout
- CZPTtricity diagram
- CZPT certificate
- CZPT handbook ebook/servicing book
2. We offers one particular-yr good quality ensure. During this period, if the machine’s malfunction is approved to be our obligation, we will deliver the damaged spare areas to you with DHL courier or other way inside of 7 workdays right after receiving the complainant. And ship the experts to the buyer’s factory for preserving. All charges are in our account.
three. Right after a single calendar year ensure, If you need we can provides payable spare parts and technician’s Visiting routine maintenance, and any broken spares we can ship you soon as attainable.
four. We believe in that our quotation meets with your specifications and we will gladly furnish you with further details.
5. 24Hours support : Cell-139157 0571 8