How should the multi-way valve of a compressed garbage truck be repaired?
Release date:2018-10-08 作者: Click:
Multi-way valveThe common fault is the operation failure. The straightforward point is that the hydraulic cylinder of the vehicle and the movement organization does not correspond to the movement of the multi-way valve control handle. The other is that the movements are very small and the movements of the systems are very slow.
due toHydraulic multi-way valveThe internal components are very fine, and the valve core that controls the action of the compact waste truck is very fine, and its fineness is the same as the thickness of our common needle tip, so it is very simple to damage and block.
In the actual application process, as soon as the multi-way valve shows a problem, we usually replace the valve block. Friends who do not touch the multi-way valve often replace the entire multi-way valve. The cost is often thousands of dollars. In fact, the multi-way valve It is composed of multiple valve groups, and each valve group is not related to each other. If we find that one handle does not work anymore, we only need to replace its corresponding valve group.
Before replacement, we can disassemble the multi-way valve and clean it. Most of the problems of the multi-way valve are caused by the blockage of the multi-way valve. Due to impurities in the hydraulic oil in the multi-way valve, perhaps the owner of the vehicle has not replaced it for a long time. The hydraulic oil causes the impurities in the oil to walk to the multi-way valve and block the multi-way valve. At this time, the multi-way valve will not operate, or the action may be slow.Let us say one more thing here. Regarding the newly purchased waste compaction vehicles, the hydraulic oil must be replaced once the vehicle is used for 3 months or 2 months. Since the new vehicle is in the running-in phase, iron filings and various components will occur in the system. Such impurities can easily block the multi-way valve.
Regarding the cleaning of the multi-way valve, we can use professional cleaning agents. If the conditions are limited, we can use organic solvents such as gasoline and diesel to clean. The oil in the multi-way valve is easily dissolved. Using high-power and high-pressure gas to flush the multi-way valve with high-pressure gas will also flush out fine dirt.
Before replacement, we can disassemble the multi-way valve and clean it. Most of the problems of the multi-way valve are caused by the blockage of the multi-way valve. Due to impurities in the hydraulic oil in the multi-way valve, perhaps the owner of the vehicle has not replaced it for a long time. The hydraulic oil causes the impurities in the oil to walk to the multi-way valve and block the multi-way valve. At this time, the multi-way valve will not operate, or the action may be slow.Let us say one more thing here. Regarding the newly purchased waste compaction vehicles, the hydraulic oil must be replaced once the vehicle is used for 3 months or 2 months. Since the new vehicle is in the running-in phase, iron filings and various components will occur in the system. Such impurities can easily block the multi-way valve.
Regarding the cleaning of the multi-way valve, we can use professional cleaning agents. If the conditions are limited, we can use organic solvents such as gasoline and diesel to clean. The oil in the multi-way valve is easily dissolved. Using high-power and high-pressure gas to flush the multi-way valve with high-pressure gas will also flush out fine dirt.
The URL of this article: http://www.sccjyy.cn/news/381.html
Key words:Multi-way valve,Hydraulic multi-way valve,Multi-way valve manufacturers
Recently Viewed:
- A "Blue Book" was delivered to the door, tax companies gathered together to talk about party building and epidemic prevention work
- Reasons for the motor heating during the use of the gear pump
- What should I do if the piston rod in the hydraulic cylinder leaks out?
- The company organizes personnel to participate in fire safety training
- Changjiang Hydraulics participated in the video training of safety production list management work
- Technical analysis of gear pump and plunger pump in mechanical engineering
- Changjiang Hydraulic participated in the XNUMXth West Expo
Related Products:
related news:
- Liang Zhongyuan, vice chairman of the Chinese People's Political Consultative Conference, led a team to visit Yangtze River Hydraulics for investigation
- Anti-epidemic and production are not wrong, the hydraulic pump branch resumes work in an orderly manner
- Positive and negative flow control of hydraulic multi-way valve
- The company won the municipal A-level tax credit in 2019
- Party members actively donate love and actively donate to fight the epidemic
- Changjiang Hydraulic won the "2019 Outstanding Contribution Award for Economic Development" in the High-tech Zone
- Take multiple measures to promote the company's orderly resumption of work
- Changjiang Hydraulics won the title of "Demonstration Enterprise for Establishing Modern Enterprise System"
- Sichuan Yangtze River Hydraulic Parts: Classification of Hydraulic Valves
- Changjiang Hydraulics Special Research Participated in Shanghai Bauma Exhibition