Vapor oil and gasoline recovery vacuum pump Application
Vapor oil and gasoline recovery vacuum pump is a fairly consummate pump for oil-gasoline restoration, working below the ambient temperature at -40~60°C. It can be used individually or as a part of oil-fuel recovery system in fuel stations, which is primarily used for oil-gasoline recovery, to decrease air pollution and help save strength.
With the growing necessity on getting benefit of environmental air pollution and strength effectively, this Vapor oil and gas restoration vacuum pump will be applied to this discipline commonly.
Structural Characteristic
Characteristic of NP80 series oil-gasoline restoration vacuum pump: a shaft dived by motor is set on the pump body, and its a single stop in the pump entire body is fixedly connected a crank which is jointed to a connection rod a piston in liner with reciprocating movement is fixed on the best of the relationship rod, and the liner is fastened in the pump body a valve seat assay above the piston has inlet valve and outlet valve which are check valves. Apart from, the inlet cavity and outlet cavity on the pump entire body are related with the inlet valve and outlet valve respectively by means of a pipeline, the inlet cavity is connected with the coupling of an air eliminator, and a single finish of the coupling is linked with the hose through the hose coupling the hose with inner and external casing is connected with nozzle.
Framework diagram:
Be aware: There are 6 electrical wires and 5 colors in WDVP-one hundred
1) Blue ,white ,brown connect 380 Voltage power.
two) There are two black electrical wires connect 220 Voltage energy. (A single hook up 220 voltage electrical power, yet another join Zero)
3) The yellow a single connects Serra.
4) The relaxation (blue, white, brown) needn’t connect.
5) Only two blacks handle the function.
Specification
l Rotary vane vacuum pump
l Pump with motor, no have an effect on the gasoline dispenser standard operation
l Compact measurement, self-lubricating Functionality
CZPT Specification |
||
Model |
Single PUMP Head |
Double Pump Head |
Max. Circulation Fee |
65 L/Min |
a hundred and twenty L/Min |
Working temperature |
-25~+fifty °C |
|
Max.Vacuum |
.07MPa |
|
Motor Velocity |
2800RPM |
|
Motor Power |
370W |
|
Power CZPT |
380V/50Hz or 220V/50Hz |
|
Noise |
≤70dB |
|
Connection |
one/four” |
3/8″ |
Characteristics
Easy set up and upkeep: eliminate the 4 screws to remove the pump head for simple installation and maintenance High vacuum stage assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & solitary section two electricity source, protected and efficient. Handles twelve fueling positions with six nozzles in simultaneous total stream procedure. Low sound, sluggish temperature increase.
one) Powerful applicability: a tiny and robust structure, the pump head can be set up at a number of angles, offering a lot more ease for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.
two) Minimal sounds style: noise does not exceed 62 decibels.
three) Service lifestyle: After strict life and security take a look at, the service lifestyle is ≥60000 several hours.
four) CZPT protection steps: The hearth escape valve is equipped with inlet and outlet ports.
Package deal Data |
Each Vacuum pump mounted by foaming,then in a carton.
|
|||
Model |
Size 1.026 |
N.W(kg) |
G.W(kg) |
|
Voltage |
One/Double |
|||
380V |
Single |
365*275*245 |
twelve.32 |
thirteen.05 |
|
Double |
490*275*245 |
14.22 |
14.95 |
220V |
One |
430*275*245 |
fourteen.32 |
15.05 |
|
Double |
525*275*245 |
sixteen.22 |
sixteen.95 |