The canned motor pump human body connects directly with motor entrance flange, and can convey the medium low temperature fluid with no granule be zero leakage.
The Canned Pump is a centrifugal pump, close coupled to a Canned Motor in these kinds of a way that
There is no dynamic shaft seal, no couplings and no ball bearings. The motor is cooled by the
Pumped liquid and the sleeve kind.
Bearings are lubricated by the identical liquid. This gets rid of the want for external lubrication.
The stator of the driving motor, which is usually 3 section squirrel cage induction motor,
Which is hermetically contained in a stator containment that consist of an external frame tube,
Out board & inboard conclude plates and the inside cylinder liner. The rotor which is welded on
The shaft, is also encapsulated with a non magnetic liner. Each stator liner (Stator Can) and
Rotor liner (rotor can) are seal welded at the two finishes, and does not allow any part of the motor to be
Uncovered to external atmosphere or internal pumped liquid.
one) No shaft seals, no leak paths
2) No buffer pots to sustain
3) No coupling or alignment difficulties
4) Main leak containment shell
five) Established bearing monitor detects bearing dress in before primary leak containment shell is contacted by the rotor
six) Dry stator design and style and sealed junction box terminal plate
seven) Controlled bearing enviroment, conservation bearing design and style and hydraulic thrust balancing, prolonged bearing lifestyle