BRW200/31.five emulsion pump

Short introduction

The BRW200/31.five emulsion pump solution collection is primarily based on the common crankcase and derives the corresponding stress parameters. This series of pumps and emulsion boxes constitute the emulsion pump station. The pump station is composed of two pumps. A single pump is employed, one particular pump is spare, and two models can be employed at the very same time if the work is needed. It largely provides the energy resource for the thorough mechanized coal mining hydraulic assist in the medium thick coal seam, and can also be utilized for other hydraulic equipment on the floor functioning fluid.

The BRW200/31.five sequence emulsion pump is a horizontal 3 plunger reciprocating pump, which is driven by a 4 pole explosion-evidence motor. Via a equipment reducer, it drives the rotation through a tire sort coupling, drives the three curved crankshaft to rotate, and then the plunger is driven by the connecting rod and slider to make the reciprocating motion, so that the operating fluid is sucked by means of the pump head, suction and discharge in the pump head. In this way, the electric powered strength can be converted into hydraulic power and output large force liquid for use when the hydraulic help functions.

Main technological parameters

Parameter identify / pump design

BRW200/31.5

Nominal flow L/min

Two hundred

Nominal stress MPa

30-one particular stage 5

Plunger diameter mm

Fifty

Quantity of plunger

3

Plunger stroke mm

Sixty-six

Crankshaft pace r/min

Five hundred and sixty-1

Motor electrical power KW

One hundred and twenty-five

voltage

1140/660

Motor product

YBK2-315M-4

The outer dimensions of the pump mm

2300 x 980 x 1040 (belt motor)

Pump bodyweight Kg

Two thousand and 6 hundred

Volume L of supporting liquid box

A single thousand and five hundred

Working medium

3~5% emulsified oil neutral aqueous resolution

The outer dimensions of the liquid box mm

3150 x 950 x 1170