CZPT Multi- Heads Bottling Filling CZPT for Oil
This equipment is appropriate for all varieties of viscous, non-viscous and corrosive liquids and so forth. It is commonly utilized in plant oils,
motor oils, chemical liquids, daily chemical liquids etc. This products is mechatronics. It is very handy to
exchange bottle samples or liquids. special style and excellent functionality. It fulfills all demands of buyers.
Siemens PLC management method, with control security operate, vacuum leak-evidence gadget, to guarantee no leaking scenario
in the course of creation, electric powered adjusting for volume system, frequency conversion management and photoelectric handle with
German TURCK manufacturer.
Feeding conveyor:
one effortlessly to alter the bottle form
two. Rise the speed
3. Connect the bottle feeding element
4. Could incorporate the bottle halting device
5. Air conveyor for the plastic bottle, screw conveyor for the glass bottle
Filling components
one. No bottle no filling
two. Exact same filling level of all the bottles, adjustable filling level
3.Filling precision ≤±2mm
4. Vacuum filling strategy
five. No dropping
Capping part
1.PCO ,plastic cap, metallic cap, aluminum cap
two.no bottle no capping
three.two sensor to check, PLC control
four.no entire no capping
five. Place & capping technique, electromagnetic capping heads, with burden discharge purpose, make sure minimal bottle crash for the duration of capping
six. All 304stainless metal construction
7. CZPT cease when deficiency of bottle
8. CZPT caps arranging and feeding, lack of caps computerized feeding
Lamp checker
Clearly to see the stuffed bottle
Vacuum tank and pump
Due to the fact the liquid contains the foam , so not only the valve has the degas characteristic, we also require the suit the vacuum pump and tank, to suck all the foam from the liquid , and send out to the vacuum tank by means of the vacuum pump
CZPTtrical apparatus
PLC/ transducer/ contact display screen: siemens
Contactor/ air change/ stabilized voltage provide: Schneider
Image electric power/ proximity swap: Atonics
Cylinder: Air tack
| Filling heads | four | 6 | 8 | ten | 12 | sixteen |
| Capacity(1L/bottle/h) | 600-1200 | 1000-1600 | 1600-2200 | 2200-2800 | 2800-3200 | 3200-4000 |
| Filling quantity(ml) | two hundred-a thousand/ 500-3000/1000-5000 | |||||
| Filling tolerance | ±0.5% | |||||
| Gasoline strain(Mpa) | .55-.8Mpa | |||||
| Gasoline use(Mpa) | .8 | 1 | one.2 | one.four | 1.6 | one.eight |
| Motor electrical power(kw) | 1 | 1.2 | one.4 | one.6 | 1.six | one.eight |